Extron electronics TLI Pro 101, Руководство пользователя

Страница: 23 / 41

Output
Press the
Display
button in the navigation panel at the top of the screen to open the
Display
screen.
Output Network Status Audio Input Advanced Exit
Resolution
Current Output:
1024x768 @ 60Hz
Set Display
Display Native
1280x1024 @ 60Hz
Project Resolution
1080p @ 60Hz
Show More
Resolutions
2
3
4
min.
Sleep Timer
Off On
2
3
4
min.
Display Timer
Off On
Show
Test Pattern
Figure 12. Output Screen
Resolution
The
Resolution
panel shows the current resolution of the TLI Pro 101 output signal and
offers three main options for setting the resolution of the TouchPanel display.
•
Click
Display Native
to set the resolution of the TLI Pro 101 output to the native
resolution of the display device.
•
Click
Project Resolution
to use an imported GUI Designer project to set the
resolution of the TLI Pro 101 output.
•
Click
Show More Resolutions
for more options:
TLI Output Resolution and Refresh Rate
Resolution List
Use
EDID
Show
All
OK Cancel
Resolution
1280 x 724
1024 x 768
1280 x 720
1366 x 769
1600 x 1200
Refresh Rate (Hz)
60
Figure 13.
TLI Pro 101 Output Resolution and Refresh Rate
When the panel opens, by default,
Use EDID
is selected. The resolutions for which
EDID files are available are listed on the left. When a resolution is selected, the list of
refresh rates available for that resolution can be seen on the right.
Click
Show All
to display all the resolutions and refresh rates supported by the
interface (for a complete list, see
Screen Resolutions
on page 9).
TLI Pro 101 • On-screen Menus 16