3.
If DHCP is disabled, set the unit IP address, subnet mask, gateway address, and DNS
server address.
a.
Press the button for the address to be edited. A dialog box opens, showing the
address and a numerical keypad.
Figure 10.
Numeric Pad for Setting IP Addresses
b.
Enter the 3-digit value for that octet (leading zeroes in an octet are ignored).
NOTES:
•
Octets can have any value between
0
and
255
.
•
If you attempt to enter an invalid number, for example
892
, you are able to
enter the
89
but the
2
cannot be entered.
•
When a valid 3-digit value is entered, the next octet is automatically selected.
c.
Press
OK
to save the changes and return to the
Network
screen or press
Cancel
to
return to the Network screen without saving the changes.
4.
If you have changed any of the values in the
Network
screen, the background color of
the button changes to blue. Press
Apply
to apply the new values or press
Revert
to
return to the previous values without saving
the changes. The button returns to gray.
If you have not made any changes, the
Apply
and
Revert
buttons are grayed out.
0.0.0.10
0.0.0.10
Unsaved
Saved
Figure 11.
IP Address, unsaved (top)
and saved (bottom).
TLI Pro 101 • On-screen Menus
15
