Extron electronics TLI Pro 101, Руководство пользователя

Страница: 19 / 41

F Reset mode LED (see figure 2 on page 5) — Provides feedback about the reset
status when the reset button is pressed (see Reset Modes on page 30).
G Reset button (recessed) — Allows the unit to be reset in any of three different modes
(see Reset Modes ).
TLI Pro 101 Front Panel Features
TLI PRO 101
TOUCHLINK INTERFACE
ACT
LINK
100
MENU
A B E D
C
Figure 6. TLI Pro 101 Plus Front Panel
A
Power LED — Lights when the unit is powered on.
B
Menu button (recessed) — Opens the Setup Menu (see the following page) and
Calibration Screen (see page 22) for the interface:
Setup Menu
1.
Press the button briefly (less than 2 seconds) to open the setup menu screens.
2.
Press the button briefly for a second time to exit the setup menu.
Calibration Screen
1.
Press and hold the button (at least 3 seconds) to open the calibration screen. Follow
the on-screen instructions to calibrate the touchpanel.
2. Complete the calibration process or press the button briefly (less than 2 seconds) for
a second time to exit the Calibration screen.
C 100 Mb network LED — Lights when the unit is connected to a 100 Mb network.
D
Network link LED
— Lights when the unit is connected to a network.
E
Network activity LED — Flashes when there is activity on the network connection.
Reset mode LED
Reset button
Power LED
Menu button
100 Mb network LED
Network link LED
Network activity LED
figure 6
TLI Pro 101 • Panel Features 12