Extron electronics PowerCage 401, Руководство пользователя

Страница: 27 / 57

Frame Status Menu
The
Frame Status
menu displays
enclosure information: the firmware
version, status of the power
supplies, fan speeds, and internal
temperature. The enclosure can
also be reset to factory default
from this menu.
NOTE: Upon doing a factory
reset this panel will display
after the display to the left.
Firmware version
The PowerCage 401 enclosure
firmware version.
Power supply status
The status of power supply #1 and
power supply #2 are
ON
or
NC
(not
connected).
Fan speed
The fan speeds for fans #1, #2,
#3, and #4 are displayed in RPMs
(revolutions per minute).
Temperature
The temperature of the enclosure
is displayed °F and °C.
Factory reset
To reset the PowerCage 401
enclosure to the factory defaults,
press down the
Menu
button for 5
seconds.
Frame Status Menu
VIEW COMM
SETTINGS MENU
FRAME
STATUS
FIRMWARE
Vx.xx.xxxx
Next
Next
Menu
Menu
POWER SUPPLY
#1 ON #2 NC
Next
FAN#1 FAN#2
1388 1514
Next
TEMPERATURE
80F 27C
Next
FACT. RESET
HOLD MENU
Next
Menu
Menu
Menu
Menu
FAN#3 FAN#4
1427 1352
FACT. RESET
RESETTING
See the Note below.
if reset
Next
Figure 13. Frame Status Menu Flowchart
NOTES:
• Upon doing a factory reset this panel will display after the display to the left.
• The factory configured passwords for all accounts on this enclosure have been
set to the enclosure serial number. In the event of a complete system reset, the
passwords convert to the default, which is no password (see
Passwords
on
page 43 to change a password).
13
PowerCage 401 Enclosure • Operation 19