Extron electronics MLC 226 IP Series, Руководство по установке

Страница: 61 / 164

4-17
MLC 226 IP Series • Software-based Confi guration and Control
PRELIMINAR
Y
Setting up passwords
1. Install and start the Extron Global Confi gurator (GC) software. See page 4-9.
2. Open an existing GC project or start a new project. Refer to the GC help fi le or
the
MLC 226 IP Series Setup Guide for instructions.
3. Click
Tools
and select
Change Device Settings
from the drop-down menu.
4.
In the Device Settings window, select (click on) the desired MLC in the list
that appears on screen.
5. Click
Settings
and choose
Set Administrator
Password
from the drop-down menu, as shown
at right. A Set for < IP address > window appears.
6. Type the Administrator password into both areas
of the window and click
OK
.
The Set for... window closes.
7. Click the
Close
button.
8. Complete the rest of the confi guration, then save the project: click
File
and
then
Save
or click the Save icon, shown below
9. Upload (build) the confi guration to the MLC. The Upload Manager window
appears, as shown below.
10.
Click
Exit
after the fi les have been uploaded.