Extron electronics MediaLink IPI 100 Series, Руководство пользователя

Страница: 49 / 64

Command and Response Table
Command ASCII (Telnet)
(host to intercom)
URL encoded
(host to intercom)
Response
(intercom to host)
Additional Description
Relay functions
Force relay on
1*1O 1 %2A1 O
Rly 1 *1
]
Turn relay on.
Force relay off
1*0O 1 %2A0 O
Rly 1 *0
]
Turn relay off.
Toggle relay
1*2O 1%2A2O
Rly 1*
X%] X%
= 1 (on) or 0 (off).
Pulse relay
1*3*
X6#
O 1%2A3%2A
X6#
O Rly 1*
X%]
Set relay pulse time (
X6#
) in
20 ms increments from
1
(20 ms, minimum) to
65535
(1310700 ms,
maximum).
Default pulse length is
25
= 500 ms.
NOTE: If the verbose mode is enabled, there are two responses from the unit because the relay is pulsed. During a
pulse, the relay is toggled to its opposite state and then back to the original state.
View the relay state
1O 1O
Rly 1*
X%]
Front panel security lockout modes (executive modes)
Off
24
0X 0X
Exe 0
]
Executive mode is off.
On
24 1X 1X
Exe 1
]
Executive mode is on.
View lockout mode
status
X X
X20(] X20(
= Front panel lockout
(executive mode) status
0
= off (unlocked)
1
= on (disabled: front panel
locked)
By default, the front panel is
unlocked.
Example: X X
0
]
Executive mode is off.
Status commands
View all voltage and
temperature status
11S 11S
shows responses to commands
12S•13S•14S•15S•16S•20S
]
View +12 V P/S
voltage 12S 12S
+
X20^]
+
X20^]
= Voltage (in volts)
View +5 V IR receiver
port voltage
13S 13S
+
X20^]
View +3.3 V IP Link/
FPGA voltage
14S 14S
+
X20^]
View +1.5 V FPGA
voltage
15S 15S
+
X20^]
View internal temp.
status
20S 20S
X20&] X20&]
=Temperature in
degrees Celsius
NOTES:
X%
=
1
(relay on) or
0
(relay off).
X6#
= Relay pulse time in 20 ms increments
from minimum 1 (= 20 ms) to maximum
65535
(1310700 ms). Default is 25 (500 ms)
X20^
= Voltage (in volts)
X20&
= Temperature in degrees Celsius
X20(
= Front panel lockout (executive mode) status
0
= off/unlocked (default)
1
= on, disable/lock the front panel.
IPI 100 and IPI 200 Series • SIS Programming and Control 41