Extron electronics MediaLink IPI 100 Series, Руководство пользователя

Страница: 22 / 64

Operation
This section describes:
•
Front Panel Features and Operation
•
Button Operation
Front Panel Features and Operation
INTERCOM
MIC ON
IPI 204
PUSH TO CALL
1 2 3 4
ROOM
101
LAB
ADMIN
OFFICE
HELP
DESK
CONFIG
INTERCOM MIC ON
IPI 201
PUSH
TO
CALL
HELP
DESK
CONFIG
IPI 204 AAP IPI 201 AAP
A A
B B
C C
D D
E E
Figure 11. Front Panels
A Speaker — This integrated speaker provides mono output at the IPI panel.
B
Mic On LED — This LED lights under two circumstances:
•
When a configured PUSH TO CALL button is pressed.
•
To indicate that someone at the help desk console is listening and that the intercom is
in monitoring mode. Monitoring mode permits hands-free operation: the user does not
have to press the Push to Talk button to speak into the intercom. It also lets help desk
staff monitor what is happening to determine whether to send security personnel to that
room.
C Microphone — Push one of the butttons and talk. The microphone is behind this opening.
D
Config Port (IPI 200 Series only) — This 2.5 mm port is used to configure the IPI 201 and
IPI 204 and to upload firmware when necessary.
E Push to Talk buttons — The IPI 101 AAP and IPI 201 units include one of these buttons,
and the IPI 104 AAP and IPI 204 units have four.
NOTE:
The MLC and IPI intercoms must be configured (via software) to associate each
button with the IP address of a specific console PC or intercoms. Once configured,
the IPI 101 AAP and IPI 201 can communicate to one location (one IP address). The
IPI 104 AAP and IPI 204 can communicate with up to four different locations.
IPI 100 and IPI 200 Series • Operation 14