DVS 510 Series • Operation
16
Picture control buttons
— Press these buttons to adjust window and image size,
position, brightness, range of dark and light values (contrast), color, tint, detail, zoom
(magnify or reduce), and pan. When one of these buttons is pressed, it lights amber.
NOTE:
When PIP mode is enabled, all picture control adjustments affect only the
PIP window.
(See
on page 37 for details on these button functions.)
LCD screen
— Displays messages, menu information, and your selections from menus
or control buttons (see
on page 20 for more information).
Menu navigation buttons
— Press
MENU
to access the DVS menu system and step
through the menus. From each menu, press
NEXT
to step through the submenus (see
ADJUST knobs
— Rotate these horizontal (
[
) and vertical (
{
) knobs to scroll through
submenu and picture control options and make adjustments.
VOLUME knob and indicator LEDs
— Turn this knob to adjust the volume on
the input that is currently selected. The three LEDs, labeled Min, Mid, and Max, light
incrementally in bottom to top order to indicate the current volume level. The Max LED
(top) is red, and the others are green (see
on page 40 for details on
these controls).
CONFIG port
— This configuration port on a 2.5 mm TRS connector is an alternative
to the RS232 port on the DVS rear panel. (For a description of the rear panel RS232
port, see
on page 7).
NOTE:
This port supports RS-232 communication only. Only the rear panel RS232
port supports both RS-232 and RS-422.
Both of the DVS serial ports can be used for system configuration and control.
Instructions are received through these ports from the computer via SIS commands or
the Signal Processing Products Control Program. Both serial ports can be active at the
same time.
The default protocol for this configuration port is:
•
9600 baud
•
8 data bits
•
1 stop bit
•
No parity
•
No flow control
An optional 2.5 mm TRS configuration cable is available at
and
can be used to connect your computer to this port (see
on page 11 for the configuration and pin assignments for
this cable).
Infrared sensor
— This sensor receives infrared (IR) signals from the IR 904 remote
control (see
