DVS 510 Series • HTML Configuration and Control
93
Scaler Settings Page
The
Scaler
Settings
page simulates elements of the DVS 510 front panel menu system
and also allows you to set video input signals (for inputs 5, 6, 7, and 9 only), configure the
output, and remotely select advanced configuration options.
Figure 38.
Scaler Settings Page
Input Configuration panel
The
Input
Configuration
panel contains drop-down menus that enable you to select
various parameters for all or some of the inputs. The following menus are provided:
•
Input
— Select the analog signal type (RGB, YUVp/HDTV, RGBcvS, or YUVi) for inputs
5, 6, 7, and 9.
•
Auto-Image
— Enable (
On
) or disable (
Off
) Auto-Image for each input. When
Auto-Image is enabled, each time an input is selected the DVS performs an image
adjustment. This consists of measuring where the active area starts and stops and
adjusting input sampling accordingly so that the image fills the window.
•
Film Mode
— Select
Enable
or
Disable
for film mode detection for each input.
