DVS 510 Series • Operation
37
Picture Controls
The DVS has six picture control buttons located on the front panel to the right of the PIP
buttons. You can use these buttons to adjust size, position, brightness and contrast,
color and tint, detail, magnification (zoom), and select a portion of the image on which to
focus the view (pan). (See the
table on the next page for an
explanation of these button functions.)
NOTE:
When PIP mode is active, all these picture controls apply to the
PIP
window. To
configure the main window, press the
PIP
On/Off
button to exit PIP mode.
Adjusting the Picture Controls
To adjust the picture controls for the currently selected input:
1.
Press the button for the input that you want to adjust. If you want to adjust the
PIP
window, press the
PIP
On/Off
button to enter PIP mode, then press the button for
the PIP input.
2.
Press the desired picture control button:
Size
,
Bright/Cont
(brightness and
contrast),
DETAIL
(sharpness),
Position
(centering),
Color/Tint
(color quality), or
Zoom/Pan
(magnification or horizontal and vertical panning).
3.
Rotate the horizontal (
[
) and vertical (
{
)
ADJUST
knobs to select a level from the
available range.
4.
Repeat steps 1 through 3 for each image adjustment you want to make for the selected
input.
NOTE:
The LCD screen displays
N/A
in place of a value if that adjustment does not
apply to the video format of the input.
