DVS 510 Series • Remote Configuration and Control
52
ASCII to Hex Conversion Table
•
Space
Figure 29.
ASCII to Hexadecimal Character Conversion Table
NOTE:
Upper- and lowercase text can be used interchangeably except where noted.
Symbol Definitions for DVS 510 Series SIS Commands
•
= Space
]
= Carriage return with line feed
}
= Carriage return with no line feed
|
= Pipe (vertical bar) character. For URL-encoded commands, has the same function
as
}
.
E
= Escape
W
= For URL-encoded commands, has the same function as
E
.
14,
24,
27,
28
= Superscripts indicate the error message displayed if the command is entered
incorrectly or with invalid parameters (see
previous page).
X!
= Input selection
1
through
10
X@
= Output selection
1
= DVI
2
= Top VGA connector
3
= Bottom VGA connector
X#
= Input video format
1
= RGB
2
= YUVp/HDTV
3
= RGBcvS
4
= YUVi
5
= S-video
6
= Composite
7
= DVI
X$
= H start
0
through
255
X%
= V start
0
through
255
X^
= Pixel phase
0
through
31
X&
= Total pixels (±512 of default value for high resolution video and ±256 of the default
value for low resolution video)
