Extron electronics DMP 64 Plus, Руководство пользователя

Страница: 31 / 99

DMP 64 Plus • Dante Controller 24
The
Device View
dialog populates with the selected DMP 64 Plus information (see
figure 27).
Figure 27. Populated Device View Dialog Box
6. Click the Device Config tab (see figure 28,
1
) to open the
Device Config
page.
Figure 28. Device Config Dialog Box
7. In the Rename Device panel, enter the new name of the device in the text field. No
spaces are allowed in the name. Names should be significant identifiers. For example,
enter
DMP64Plus-MainRack (
2
).
8. Click Apply (
3
). A confirmation prompt opens.
9. Click Yes (see figure 29,
1
) to confirm the new name, then close the
Device
Configuration
dialog box. The new name is written to the Dante interface of the
DMP 64 Plus. Repeat as necessary for all devices.
NOTE: The device name assigned in Dante Controller only applies to the Dante
interface and does not affect the device name recognized in DSP Configurator.
Figure 29. Rename Device Confirmation Diaglox Box
27
28
29