Extreme Networks SSA S180 Class, Руководство по установке оборудования

Страница: 21 / 84

Note
•
The rack mounting ear provides three holes for securing the SSA switch to the rack. Use at
least two screws or fasteners appropriate to your rack on each side when securing the SSA
switch to the rack.
•
We recommend that power supplies be installed after the SSA switch has been secured to
the rack to minimize weight that must be supported when installing rack screws
To secure the SSA switch to the rack, follow these steps:
1 Ensure that the rack mount ears are properly installed based upon the discussion in Rack Mount Ear
Positioning on page 17.
2 Align the rack mount ear holes with the front rack post holes in either a flush ( Figure 9 ) or mid-
mount ( Figure 10 on page 22) configuration.
3 Secure the SSA switch to each rack post with at least two screws or fasteners appropriate to the
rack as shown in callout 1 of the appropriate figure ( Figure 9 or Figure 10 on page 22).
Figure 9: Securing the SSA Switch to the Rack in a Flush Mount Configuration
1 = 4 to 6 screws or fasteners appropriate to the rack
Installation
S-Series Stand Alone (SSA) Switch Hardware Installation Guide 21