Explorer KALLIO 50, Руководство пользователя

Страница: 101 / 358

PERIODIC MAINTENANCE AND MINOR REPAIR
6-1
2
Checking the front brake fluid
level
1
1. Minimum level mark
Insufficient brake fluid may allow air to
enter the brake system, possibly caus-
ing it to become ineffective.
Before riding, check that the break fluid
is above the minimum level mark and
refill it if necessary. Low position brake fluid
level may indicate worn brake pads and/
or brake system leakage. If the brake
fluid level is low, be sure to check the
brake pads for wear and the brake sys-
tem for leakage.
Observe these precautions:
t When checking the fluid level,
make sure that the top of the mas-
ter cylinder is level by turning the
handlebars.
t Use only the recommended qual-
ity brake fluid, otherwise the rub-
ber seals may deteriorate, causing
leakage and poor braking perfor-
mance.
Recommended brake fluid:
DOT 4
t Refill with the same type of brake
fluid. Mixing fluids may result in a
harmful chemical reaction and lead
to poor braking performance.
t Be careful that water does not en-
ter the master cylinder when refill-
ing. Water will significantly lower the
boiling point of the fluid and may
result in vapor lock.
t Brake fluid may deteriorate painted
surfaces or plastic parts. Always
clean up spilled fluid immediately.
t As the brake pads wear, it is nor-
mal for the brake fluid level to
gradually go down. However, if the
brake fluid level goes down sud-
denly, have a
Explorer dealer check.
Changing the brake fluid
Have a Explorer dealer change the
brake fluid at the intervals specified in
the NOTE after the periodic mainte-
nance and lubrication chart.