SSE232-LE User’s Manual
Exemys
Appendix
A
Appendix
A.Appendix
A.1. Device Locator Application
The Exemys Device Locator Application Program is intended to use for the basic configuration of
any Exemys device over your ethernet network. It allows to search, identify and configure the
basic network parameters.
This simple application program is distributed with any Exemys product in the accompanying CD.
You can also download the latest version of this program from the Exemys Web Site
(www.exemys.com).
The Device Locator application must be running from any PC within the network where the
Exemys devices to configure are installed.
Figure 11 - Exemys Device Locator
When the Device Locator is run for the first time it will search any Exemys device within the
network. If there is an Exemys device in the network it will be shown in Device Locator Grid:
Device: Device name, such as SSE232-LE or KIBe.
Version: Firmware version it is running in that device.
MAC Address: Hardware Ethernet Address of the device.
IP: IP Address configured in the device
Netmask: Subnet mask configured in the device
Gateway: Gateway IP Address configured in the device.
www.exemys.com Rev.
1.0.3
Page27
