manualshive.com logo in svg

Exar XRT71D00, Руководство пользователя

Поделиться
Скачать
Exar XRT71D00 Скачать руководство пользователя страница 36

      

   

 

                        

TAN-042

 

 

Designing the XRT71D00 and the XRT73L00 Devices to  

 operate in the Host Mode, and to be accessed via a single Chip  
 Select pin.                  

     

Preliminary 

    

                                                                        July 19, 2001

                  

 

Revision 1.03 

 34 

Command Register CR2  

 

Bit D0 – REQDIS (Receive Equalizer Enable/Disable) 

This “Read/Write” bit-field permits the user to enable or disable the Receive Equalizer 
within the XRT73L00 device. 
 
Setting this bit-field to “0” enables the Receive Equalizer within the Receive Section of 
the XRT73L00 device.  Conversely, setting this bit-field to “1” disables the Receive 
Equalizer. 
 

NOTE:

  For most DS3, E3 and STS-1 applications, the user is advised to enable the 

Receive Equalizer for all mandated cable lengths. 
 
 

Bit D1 – DLOSDIS (Digital LOS Detector Disable) 

This “Read/Write” bit-field permits the user to enable or disable the “Digital LOS” 
Detector, within the LIU IC. 
 
Setting this bit-field to “0” enables the “Digital LOS” Detector.  Conversely, setting this 
bit-field to “1” disables the “Digital LOS” Detector. 
 

NOTE:

  This bit-field is ignored if the XRT73L00 device has been configured to operate 

in the “E3” Mode. 
 
 

Bit D2 – ALOSDIS (Analog LOS Detector Disable) 

This “Read/Write” bit-field permits the user to enable or disable the “Analog LOS” 
Detector, within the LIU IC. 
 
Setting this bit-field to “0” enables the “Analog LOS” Detector.  Conversely, setting this 
bit-field to “1” disables the “Analog LOS” Detector. 
 
 

Bit D3 – ENDECDIS (B3ZS/HDB3 Encoder & Decoder Block Enable/Disable) 

This “Read/Write” bit-field permits the user to enable or disable both the B3ZS/HDB3 
Encoder and Decoder blocks within the XRT73L00 LIU IC.   
 

Содержание XRT71D00






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды