46
WT.025.200.000.DE.IM 0517
Operation
S10k
5.
water.
The above maintenance schedule provides recommended clea-
ning intervals. However, your own operating experience is the best
guide to preventative maintenance and may result in significant
variations from the recommended schedule.
5.7.5
Changing the activated carbon filter
Replace the carbon when smelling to chlorine or when lumped. To
do so, unscrew the activated carbon filter and open carefully. If
there is no smell of chlorine (or sulphur dioxide), stirr the carbon
powder and the included ceramic rings and check for lumbs. If the
carbon powder is ok. screw the filter in place.
Warning!
Chlorine loaded carbon reacts with water generating hydrochloric
acid. Don't pour into water or pour water on it, but neutralize first!
Wear breathing equipment, eye protection and protecting clothing!
Neutralazing of the carbon powder:
Cl2 loaded carbon
1
Carry the filter to the open air.
2
Mix 300 g sodium thiosulphate with 8 l of water.
3
Remove upper cover of the filter.
4
Pour the carbon carefully into the solution.
5
Dilute with more water and pour away.
6
Dispose off the ceramic rings.
7
Fill the filter with new carbon and ceramic rings (part no.
W3T161729) and put in place.
SO2 loaded carbon
As above, but use caustic soda solution.
5.7.6
Preparation for Winter Shut-Down
If the gas feeder is to be shut down for an extended period during
freezing weather, the following procedure must be followed.
1
Shut down the gas feed system evacuate all gas and release
any pressure in the discharge line (see Section 5.2.2).
2
Drain the discharge line, and prevent any water flow into it.
3
Drain any water in the injector.
Note
If the equipment is to be removed for storage, seal all fittings and
all gas lines with rubber stoppers to prevent the entrance of at-
Содержание WALLACE & TIERNAN S10k
