Evoqua WALLACE & TIERNAN DEPOLOX 5 E 700 P Series, Инструкция по эксплуатации

Страница: 8 / 82

8
WT.050.810.040.DE.IM.0519
Safety
DEPOLOX
®
5 E flow cell
2.
2.2 General safety instructions
The manufacturer places great value upon safety when working with the
unit. This was already taken into account in the design of the system, by
the integration of safety features.
Safety regulations
The safety instructions in this documentation must be observed. Addi -
tional industry-wide or in-house safety regulations also continue to apply.
Safety warnings on the
unit
All safety instructions attached to the unit itself must be observed. These
instructions must always be clearly legible and complete.
State-of-the-art
technology
The unit has been constructed in accordance with state-of-the-art tech -
nology and the accepted safety regulations. However, if the unit is used
by persons who have not been adequately instructed, risks to life and
limb of such persons or third parties and damage to the unit itself or to
other property cannot be ruled out. Work not described in this instruction
manual must be performed only by authorized personnel.
Personnel
The operator of the overall system must ensure that only authorized and
qualified specialized personnel are permitted to work with and on the unit
within their defined scope of authority. "Authorized, specialized person -
nel" refers to trained technicians employed by the operator, the manufac -
turer, or, if applicable, the service partner. Only qualified electricians
must perform work on electrical components.
Spare parts / components
Trouble-free operation of the unit is only guaranteed if original spare
parts and components are used in precisely the combination described
in this instruction manual. Failure to observe this instruction may incur the
risk of malfunction or damage to the unit.
Extensions and conver -
sions
Never attempt to perform any modifications, extensions or conver-sions
on the unit that could have an adverse affect on safety with-out the writ -
ten approval of the manufacturer.
Electrical power
During normal operation, the controller must remain closed. Connect the
power cables in accordance with the wiring diagram.
Warning!
Risk of injury or death!
External voltages can be connected even with the operating voltage
switched off.