H.265 VANGUARD 4x2H / 8x4H / 16x8H
88
4.1.8.6 CC
The DVR will count the times when objects (people, vehicle or other objects) cross a pre-
defined line, and the CC (Cross-Counting) event will be triggered. You can configure some
event actions like event recording, Email alert or pop-up full screen when an event is
triggered.
You can search and view the statistical result of cross counting on the Intelligent Analysis
page. Please refer to
4.1.8.8 Intelligent Analysis
.
Channel:
Select a channel you want to configure.
Switch:
Enable or disable the function.
Buzzer:
Select a time for DVR buzzer to sound when an event is triggered. Select
Disable
to
disable the buzzer.
Sensitivity:
Select a sensitivity value from the drop-down list. The larger the value, the
higher the sensitivity.
Scene:
Please select
Indoor
or
Outdoor
based on the location where your camera is installed.
Area:
Click the
Setup
button to set up the detection lines. Please refer to
4.1.8.6.1
Configuring CC Detection Lines
for more details.
Post Recording:
Select a post recording time when an event is triggered.
Latch Time:
Select an alarm output time (duration) when events occur. When an event is
triggered, the alarm will last based on the setup latch time.
Alarm Out:
Check the box to enable the connected external alarm output device.
Show Message:
Check the box to display an “S” letter on the upper-right corner of the live
channel when an event is triggered.
