H.265 VANGUARD 4x2H / 8x4H / 16x8H
68
4.1.5
Motion
You can configure the motion settings and motion event notifications on this page. You can
also enable the Push Notification function to send motion event alerts to your mobile devices
(with VANGUARD App installed). For more details on Push Notification, please refer to
Appendix B: Push Notification
.
To configure the Motion Detection settings:
1.
Click
to bring-up the Motion Area Setup page.
a.
Select a channel from the
Channel
drop-down list.
b.
Select
Enable
from the
Switch
drop-down list to enable motion detection function.
c.
To set up motion detection sensitivity level, select a value from the
Sensitivity
drop-
down list. The higher the value the higher the sensitivity.
d.
By default, the whole areas are marked in red. The red blocks represents the areas are
applied with the motion detection function. You can click the mouse and drag it to
draw multiple areas. To clear a certain area, use the same method to draw on the
same area again, the motion area will be erased.
e.
To save the settings, right-click the mouse to return to the Motion Setup page and
then click
Apply
to save the settings.
