H.265 VANGUARD 4x2H / 8x4H / 16x8H
97
4.2.2
Record
On this page, you can configure the recording parameters and recording schedule for each
channel.
4.2.2.1 Record
Channel:
Displays channel number.
Record Switch:
Check the box to enable the function.
Stream Mode:
Select a recording mode for the channel. If you select
DualStream
, the
system will record both Main Stream and Sub Stream. If you select
MainStream
, the system
will only record Main Stream.
PreRecord:
Check the box to enable the pre-record function. The DVR will start recording a
few seconds before an alarm/event is triggered.
Copy:
You can apply the
same
configurations from one channel to other channels. Select a
channel from the
Source Channel
drop-down list and then select the parameters you would
like to apply to other channels. Select the desired channels from the
Target Channel
field
and then click the
Copy
button.
Default
: Click to apply the default setting.
Apply:
Click to save the settings.
