H.265 VANGUARD 4x2H / 8x4H / 16x8H
117
Select:
Select the HDDs in the
Select
column to select the HDD(s), and then you can set up
the Overwrite function or Format the HDD.
Overwrite:
Select
Auto
to enable the overwrite function;
Off
to disable the overwrite
function. If
Auto
is selected, the DVR will overwrite the oldest files on the HDD when HDD is
full. If Off is selected, please check the HDD status regularly, to make sure the HDD is not full.
The
1/3/7/14/30/90
Days stands for the last number of days to keep in the HDD. For
example, if 3 Days is selected, the last 3 days recordings will be kept in the HDD.
Format HDD:
The first time use HDDs have to be formatted before you can use it. Select the
desired HDDs and then click the
Format HDD
button to format the selected HDDs. Note that
only the HDDs with “Unformat” status displayed in the State column are required to format
or the recording function will not work. WARNING: This will effectively ERASE the ENTIRE
hard disk!! Please backup the data from HDDs before formatting the HDDs.
Note:
1.
Only the HDDs with “OK” in the State column can perform the recording function. If not,
format the HDDs before start using the recording function.
2.
The “Free Time” on the HDD list indicates the remaining time for the HDD to record
based on the pre-setup resolution, streaming and fps.
Default
: Click to apply the default setting.
Apply:
Click to save the settings.
