H.265 VANGUARD 4x2H / 8x4H / 16x8H
70
4.1.6
PIR
This function is only available when the supported analog/IP cameras with PIR function are
connected. For the supported cameras, please contact EverFocus ([email protected]).
When the camera detects an object move in or out of the PIR sensor range, the DVR will start
recording or send alert notifications.
To configure the PIR Detection settings:
1.
Click
to bring-up the PIR Area Setup page.
a.
Select a channel from the
Channel
drop-down list.
b.
Select
Enable
from the
Switch
drop-down list to enable PIR detection function.
c.
To set up PIR detection sensitivity level, select a value from the
Sensitivity
drop-down
list. The higher the value the higher the sensitivity.
d.
Click
Select All
to set the whole screen of the camera as PIR detection area. Click
Delete All
to clear the whole area. You can also set up an area by drawing a polygon
