H.265 VANGUARD 4x2H / 8x4H / 16x8H
176
5.4.3
Alarm
You can configure the alarm settings on this page.
5.4.3.1 Motion
After configuring the Motion Detection settings (please refer to
5.4.1.5 Motion Detection
),
you can further configure the Motion Alarm settings.
Channel:
Select a channel from the drop-down list.
Buzzer:
Select a time for DVR buzzer to sound when a motion event is triggered. Select
Disable
to disable the function.
Latch Time:
Select an alarm output time (duration) when events occur. When an event is
triggered, the alarm will last based on the setup latch time.
Post Recording:
Select a post recording time when a motion event is triggered.
Show Message:
Switch the button to the right to enable displaying motion icon “
M
” on the
live channel when a motion event is triggered.
Send Email:
Switch the button to the right to enable the Email alert function. When a motion
event is triggered, the DVR will send an email alert with a snapshot to the pre-configured
Email receiver. Note that for this function to work, you have to set up the Email function in
advance (refer to
5
.
4.4.3 Email
).
Full Screen:
Switch the button to the right to enable the full screen function. If this function
is enabled and a motion event is triggered, the triggered channel will be displayed in full
screen.
Alarm Out:
Check the box to enable the connected external alarm output device.
