H.265 VANGUARD 4x2H / 8x4H / 16x8H
15
【
Local Connection
】
DHCP:
For DHCP users, check DHCP, the router will automatically assign all the below IP
parameters to the DVR.
IP Address:
The IP address of the DVR. The IP address consists of four groups of numbers,
separated by periods. For example, “192.168.001.100”.
Subnet Mask:
Subnet mask is a network parameter which defines a range of IP addresses that
can be used on a network. The subnet address also consists of four groups of numbers,
separated by periods. For example, “255.255.000.000”.
Gateway:
This address allows the DVR to access the Internet. The format of the Gateway
address is the same as the IP Address. For example, “192.168.001.001”.
【
DNS
】
DNS1 is the primary DNS server and DNS2 is a backup DNS server. Usually, it’s enough to just
enter the DNS1 server address.
【
Port
】
Web Port:
The Web port can be used to remotely login the DVR (e.g. using the Web Client). If
the default port 80 is already taken by other applications, please change it.
Client Port:
The Client port can be used to send information through (e.g. using the mobile
app). If the default port 9000 is already taken by other applications, please change it.
RTSP Port:
The RTSP port allows the DVR to transmit real-time streaming to other devices (e.g.
using a streaming media player).
UPnP:
If you want to remotely login the DVR using Web Client, you need to enable the UPnP
function and also enable the Port Forwarding function on your router.
Note:
1.
For the UPnP function to work, an UPnP-enabled router is required.
2.
If your router does not support UPnP, ensure the
Port Forwarding
function is manually
enabled on your router.
【
PPPoE
】
PPPoE is an advanced protocol that allows the DVR to connect to the network via a DSL
modem. To enable the PPPoE function, check
Enable PPPoE
, input the
User Name
and
Password
provided by your Internet Service Provider.
Check the “Enable PPPOE” box, and then enter the User name & Password of the PPPoE.
