EMV400S FHD / EMV400SSD Mobile DVR
80
6.4.3
Motion
You can enable the Motion Event function and configured the related settings including motion
event notifications and motion areas in this menu.
Camera:
Select a camera to be configured.
Enable:
Check the box to enable the Motion Event settings for the selected camera.
Log:
Check the box to record motion events to log data.
Pre-alarm Record:
Check the box to start copying the recordings to the storage from 5 seconds
before the alarm event occurs. The pre-alarm recording rate will follow the Normal Speed
configured in the earlier section (see
6.2.1 Basic Setting
). Note that the Pre-Alarm recording
time may be reduced from 5 seconds when the system loading is too heavy, e.g., when all
channels are triggered for pre-alarm recording simultaneously.
Buzzer:
Check the box to enable the buzzer when a motion event is triggered.
Email Notify:
Check the box to send email notification when a motion event is detected. Email
operation requires valid email entered in the Email setup menu (see
6.7.4 Email
).
Network Alarm:
Check the box to send out a network alarm to a client PC when motion occurs.
This feature works with EverFocus’ CMS software. You will need to configure the Alarm Server
for the mobile DVR to send network alarms to the client PC (see
6.7.7 Alarm Server
).
