Ever POWERLINE RT 1000, Инструкция по эксплуатации, Страница: 23 / 48

Instruction manual for POWERLINE RT 1-3 kVA UPS units
23
www.ever.eu Pomoc Techniczna, tel.: +48 61 6500 400
2016-07-13 12:09
MENU 3. - CONTROL
Submenu Function
3.1 BATTERY TEST After selecting this option, the battery test is performed
3.2
MANUAL BYPASS
ON / OFF
Switching the UPS unit to bypass mode and back
3.3
SEC. 1 OUTPUTS
ON / OFF
Section 1 outputs on / off (first group of controllable output sockets)
3.4
SEC. 2 OUTPUTS
ON / OFF
Section 2 outputs on / off (second group of controllable output sockets)
MENU 4. - SETUP
Submenu Function
4.1
LANGUAGE
SELECTION
Language selection (English, Spanish, Italian, French, Polish, Portuguese,
German)
4.2 SOUND ALARM Sound alarm activated / deactivated (buzzer)
4.3
OUTPUT VOLT.
SETTING
Selection of output voltage (200 V, 208 V, 220 V, 230 V or 240 V)
4.4
OUTPUT FREQ.
(IN STAND. MODE)
Selection of rated output frequency 50 Hz or 60 Hz (only in frequency conversion
mode)
4.5.
FREQ. CONVERSION
(IF UPS IS OFF)
Activation / deactivation of frequency conversion mode (UPS must be in standby
mode)
4.6
SEC. 1 OUTPUTS
SETTING
Selection of battery charging level (75%, 50%, 25% or 0%) below which output 1
(first group of controlled output sockets) is deactivated automatically
4.7
SEC. 2 OUTPUTS
SETTING
Selection of the battery charging level (75%, 50%, 25% or 0%) below which output
2 (second group of controlled output sockets) is deactivated automatically
4.8
COLD START
ON / OFF
Cold start on / off (UPS starts without power from the mains)
4.9
START AFTER
DISCHARGING
ON / OFF
Automatic restart function on / off (UPS starts automatically after autonomous
operation time expires, when power in the mains is back)
4.10
ECO MODE
ON / OFF
ECO mode on / off
4.11
PHASE DETECTION
ON / OFF
Phase detection function on / off (detection of incorrect order of input cables)
4.12
AUTOMATIC
BATTERY TEST
Setting of automatic battery test (every day, every week, every month, ...)
4.13
BAT. DIS. LEVEL
ALARM SETTING
Selection of battery charge level (75%, 50%, 25% or 0%) under which signal
"Battery low level" is generated.
MENU 5. - INFORMATION
Function
Displays rated power of the UPS, software version and UPS working time.