Eventide H8000FW, Руководство по эксплуатации, Страница: 76 / 206

70
assigning silence (
-----------
) to the last two inputs isn’t really necessary since we don’t
plan to use those outputs …
Now, we need to assign analog input 1 to DSP A’s
inputs 1&2. Do this at the
DSP A
menu page in the
SETUP
area. Again, assigning silence to the remaining
inputs isn’t necessary because
Backward Garden
only
has two "live" inputs (its "I/O identifier" is
22
).
Cool. Let’s assign the analog outputs now at the
outputs
menu page in the
SETUP
area. We want DSP
A outputs 1&2 at analog out 1&2 to send to the stereo
cabinet. Although we’re not actually using analog outputs 3&4, we still need to assign
DSP B outputs 1&2 to them so that the ADAT outputs can “tap” these signals.
Now let’s assign the AES/EBU outputs at the
outputs
menu page. The first four AES/EBU outputs are DSP
B outputs 3-6. Recall that the S/P DIF outputs simply
"tap" AES/EBU outputs 1/2, in this example,
dsp B out 3
and
dsp B out 4
.
Finally, let’s assign the appropriate signals to the
ADAT outputs. Do this at the "bottom"
outputs
menu page in the
SETUP
area. Notice that ADAT
inputs are also connected to the ADAT channels that we weren’t interested in using (3
through 6). We probably didn’t need to … H8000FW owners can set up AES11-18 and
the FIREWIRE outputs in the same way.
And that’s it! Once you get the hang of it, making custom routing configurations is no
sweat! When you are happy with things, don’t forget to save the routing (see next section).
Storing and Loading Routing Configurations
Nevertheless, you don’t have to wrestle with all those parameters every time you want to
change the routing configuration. As you’ll recall, in the
Overview and Quickstart
section we used the Routing Storage area for loading entire routing configurations in one
go. In addition to loading the preset routing configurations that came with the
H8000FW, you can also save your own configurations for future use.
→ Block diagrams and descriptions of the preset routing configurations can be found in Loading Routing
Configurations on page 26.