manualshive.com logo in svg

Eventide H8000FW, Руководство по эксплуатации, Страница: 138 / 206

Поделиться
Скачать
Eventide H8000FW Скачать руководство пользователя страница 138

 

 

132

Copying Programs 

To copy a program, simply load it and then use 

Save

 to save it where you would like the 

program copied to.  You can copy a program from one place in internal memory to 
another, from one place on a Memory Card to another, from internal memory to a 
Memory Card, or from a Memory Card to internal memory. 

The "Size" of a Program and Its Ramifications for Storage 

Finite things overrun the world we inhabit.  There is a limit to the space available in the 
H8000FW for the storage of programs.  Not everything is perfect.  Roughly 460 kilobytes 
of space is available for storing 

your

 programs internally.  A program typically requires 

between 1 kilobyte and 20 kilobytes of space for storage.  In the worst case that means 
you can store 30 programs in internal memory.  A more realistic number might be 100.  If 
that’s not enough for you, don’t despair!  You can save programs on Memory Cards that 
can contain as much as 256,000 kilobytes of space!  And if you fill up one Memory Card, 
you can always get another. 

→

 See 

Memory Cards

 on page 50.

 

Содержание H8000FW















































































































































































































Отзывы:

Нет отзывов