21
Rear-facing Installation with
Lower Anchor Connectors
Rear-facing
E
DO NOT
use this child restraint if it moves more than
25 mm (1 in.) side-to-side or front to back at the
rear-facing belt path. Serious injury or death may result
from poor installation. If you can not tightly secure the
child restraint, try again or move it to another location,
or install with the vehicle seat belt.
WARNING
Using your full weight, push the child restraint firmly into
the vehicle seat while pulling up on the lower anchor
connector assembly strap to tighten.
The lower anchor connector assembly strap must be as
tight as possible.
If you can move the child restraint more than 25 mm
(1 in.) side to side or front to back at the rear-facing belt
path
E
, the lower anchor connector assembly strap is not
tight enough. You will need to try again, find another
location for your child restraint, or install with the vehicle
seat belt (page 22). To remove the lower anchor connector
assembly strap, go to page 46.
6
