REV/B
QTY
PARTS DESCRIPTION
12
3/8” X 2” HEX BOLTS
24
3/8” HEX NUTS
24
3/8” LOCK WASHERS
48
3/8” FLAT WASHERS
QTY
12
4
2
1
1
PARTS DESCRIPTION
3/8” X 1” HEX BOLTS
D02 FRONT AND REAR MOUNTING BRACKETS
D03 CENTER MOUNTING BRACKETS
D24097P PASSENGER SIDESTEP
D24097D DRIVER
SIDESTEP
INSTALLATION INSTRUCTIONS
Read the instructions completely before you begin the installation.
If your vehicle is equipped with factory running boards, remove the boards, brackets and fasteners.
This installation uses (3) mounting brackets per side, and requires drilling (2) holes in the lower body
pinch mold for each bracket.
It is the installer’s responsibility to confirm all measurements and that there are no obstructions such as
brake, fuel or electrical lines before drilling.
Step 1. Beginning with the passenger side measure reward from the front fender bolt (refer to diagram for
dimensions) and scribe (6) vertical lines on the body pinch mold.
DOMINATOR SERIES SIDESTEPS
ASSEMBLY & INSTALLATION INSTRUCTIONS
PART NO. D24097 02-08 DODGE RAM QUAD CAB
Do not attempt to install this product on any vehicle other than the one it is designed for and listed above!
