52
Installing Child Restraint
Rear-facing in Aircraft
The aircraft seat belt
A
must be as tight as possible. Route
the excess seat belt strap
D
back through the rear-facing
belt path
B
opening, as shown above. Using your full
weight, push the child restraint firmly onto the aircraft
seat while pulling on the excess seat belt strap to tighten.
Check your work.
Reconnect the seat pad to the front of
the child restraint. Try to move the child restraint in all
directions. If you can move the restraint more than
25 mm (1 in.) from side to side or front to back at the
rear-facing belt path
B
, the aircraft seat belt
A
is not
tight enough, and you
MUST
install again until the seat
belt is tight.
A
B
D
4
