19
WARNING
Make sure both harness straps are installed
completely
on the splitter plate, as shown.
Failure to properly attach the harness straps to the
splitter plate may result in a loose harness and serious
injury or death to your child.
Attach the harness straps
B
to the splitter plate
C
using
the
infant position
(page 37)
on the harness straps.
As your child grows, you can
attach the harness straps
B
to the splitter plate using the
pockets at the end of the
straps.
2
Pull the seat pad off of the front
of the child restraint. Route the
Lower Anchor Connector strap
D
and hook through the
rear-facing belt paths
E
.
IMPORTANT:
Make sure the
Lower Anchor Connector strap
D
is
in front of the crotch strap
F
, and it lies flat without twisting,
as shown. Reconnect the seat pad
to the front of the child restraint.
Rear-facing
Rear-facing Installation with
Lower Anchor Connectors
C
B
B
E
F
D
3
