37
1
2
3
D
There are two positions on the harness straps. The top
loop
E
is for infant use. The bottom loop
F
is for use as
your child grows. Reattach the harness strap onto the
splitter plate
D
. Repeat on the other side.
D
F
Child
D
E
Infant
Child
Infant
To change the
harness strap
position, loosen the
shoulder harness as
shown on page 43,
step 2. Slide the
harness strap off the
splitter plate
D
.
Pull harness strap
through to the front of
the child restraint.
Thread each harness
strap through the
appropriate slot. Pull
the harness strap to
the back of the child
restraint.
General
WARNING
Make sure both harness straps are installed
completely
on the splitter plate, as shown.
Failure to properly attach the harness straps to the
splitter plate may result in a loose harness and serious
injury or death to your child.
