30
4
3
D
Hook
Adjuster
Strap
SecureRight
Quick Connector
Clip
Strap
Adjuster
E
E
F
E
G
Know Your Lower Anchor
Connector Assembly
The lower anchor connector assembly that comes with
your child restraint will be one of the two types below.
Refer to your vehicle owner’s manual to locate the lower
anchor bars
E
on your vehicle seat. Attach the right hook
F
, or clip
G
, to the right anchor bar
E
and the left hook,
or clip, to the left anchor bar.
DOUBLE CHECK
that the
lower anchor connector hook is fully engaged by pulling
hard on the lower anchor connector strap.
DO NOT
use this child restraint if it moves more than 25 mm (1 in.)
side-to-side or front to back at the forward-facing belt path. Serious
injury or death may result from poor installation. If you can not tightly
secure the child restraint, try again, move it to another location, or
install with the vehicle seat belt.
WARNING
Using your full weight, push the child restraint firmly
into the vehicle seat, while pulling up on the lower anchor
connector strap to tighten.
The lower anchor connector strap must be as tight as
possible.
If you can move the child restraint more than
25 mm (1 in.) side to side or front to back at the belt path
D
, the lower anchor connector strap is not tight enough.
You will need to try again, find another location for your
child restraint, or install with the vehicle seat belt (page 32).
To remove the lower anchor connector strap, go to page 46.
