54
Installing Child Restraint Forward-
facing in Aircraft
3
Fasten the aircraft seat belt
A
.
The aircraft seat belt must be as tight as possible. Route
the excess aircraft seat belt strap
C
back through the
forward-facing belt path
D
opening, as shown above.
Using your full weight, push the child restraint firmly onto
the aircraft seat while pulling on the excess seat belt strap
to tighten.
Note:
Because of the fixed length of aircraft seat belts,
the belt buckle could be behind the child’s back after
tightening the belt. For your child’s comfort, Evenflo
recommends cushioning the child’s back by placing a
small pillow or folded-up blanket, or a folded-up jacket,
over the belt buckle.
Check your work.
Reconnect the seat pad to the front
of the child restraint. Try to move the child restraint in all
directions. If you can move the restraint more than 25 mm
(1 in.) from side to side or front to back at the forward-
facing belt path, the aircraft seat belt is not tight enough,
and you
MUST
install again until the seat belt is tight.
4
A
C
D
