22
Rear-facing Installation with Seat Belt
Attach the harness
straps
B
to the splitter
plate
C
using the
infant position
(page 37)
on the harness straps.
As your child grows, you
can attach the harness
straps
B
to the splitter
plate using the pockets
at the end of the straps.
1
Infants
MUST
a
lways ride facing the rear of
the vehicle.
Adjust the child restraint to the
recline
position
(page 38). Place the child restraint in your
vehicle
rear-facing
. Adjust the restraint so that the level
arrow
A
is level with the ground.
NEVER
turn a child restraint
forward-facing
with a child who
weighs less than 10 kg (22 lbs).
Crash forces may cause serious
injury or death.
For complete child requirements for
forward-facing use, see page 2.
WARNING
ARROW
MUST
BE LEVEL WITH
GROUND WHEN USED REAR-FACING
REAR OF VEHICLE
ARROW
MUST
BE LEVEL WITH
GROUND WHEN USED REAR-FACING
REAR OF VEHICLE
A
C
B
B
2
WARNING
Make sure both harness straps are installed
completely
on the splitter plate, as shown.
Failure to properly attach the harness straps to the
splitter plate may result in a loose harness and serious
injury or death to your child.
