Instruction Manual MM850404 ed.05
45
Press the [
ENTER
]. Press the [
MENU
] key until the following page is displayed:
Press the [
ENTER
] key to enter in set-up mode.
Press the [
S
] and [
T
] keys to change the flashing digit (Day). Press the [
ENTER
] key to store the changes.
Press the [
S
] and [
T
] keys to change the flashing digit (Month). Press the [
ENTER
] key to store the changes.
Press the [
S
] and [
T
] keys to change the flashing digit (Year). Press the [
ENTER
] key to store the changes.
Press the [
S
] and [
T
] keys to change the flashing digit (Hour). Press the [
ENTER
] key to store the changes.
Press the [
S
] and [
T
] keys to change the flashing digit (Minutes). Press the [
ENTER
] key to store the changes.
Press
[
ESC
] to return to the measure page.
8.6 Configuration
Software
GasConfig
software is a PC windows compatible program for configuring the
flue gas analyzers. You can change all
memory settings: displayed measurements pages, printed measurements layout, Alarms, Fuels coefficients, measuring
technical units, etc.
8.6.1
GasConfig Installation
The Software runs on IBM PC under WINDOWS 95/98/NT operative systems. Minimum requirements are a Pentium
CPU with 16Mbyte Ram and 8 Mbyte on hard disk, a colour monitor and a Microsoft mouse or a compatible one.
In order to install the Software for Windows, follow the below procedures:
•
Place the Software disk in a CD-ROM drive;
•
From the Windows Start Menu, select
<RUN>
;
•
Enter the filename D:SETUP.EXE (substitute the letter D for the disk drive that contains Software disk)
•
Follow the on screen instructions making sure to provide the correct path to your Software directory when prompted.
Once installed, the
2000 series Configuration Software
icon will appear on your Windows screen and it will be possible
to boot it by clicking on the icon as usual.
8.6.2
How operate using GasConfig
When you run
GasConfig,
2 independent windows system will be displayed on the PC monitor.
Содержание EcoLine 2000
Страница 53: ...Instruction Manual MM850404 ed 05 53 APPENDIX...
