Instruction Manual MM850404 ed.05
35
NOTE:
A
MBIENT
CO
MONITORING IS ACTIVE ONLY ON
“COAMBINT”
OPERATIVE PAGE
.
Press
[
ESC
] to return to the measure page.
6.6
Gas Network Leak Test
(option)
6.6.1
External Natural Gas Leak Probe
To enable natural gas monitoring, connect the optional external probe to the instrument.
To perform the test, press the [
MENU
] key from measuring page.
Press the [
ENTER
]. Press the [
MENU
] key until the following page will be displayed:
Press the [
ENTER
] key to monitor gas concentration.
NOTE:
W
HEN PROBE IS CONNECTED
,
THE INSTRUMENT BEGINS A
50
SECOND HEATING TIME
.
Before inserting the probe in the working area, let it stand for a few seconds in fresh and uncontaminated air.
From this moment the unit will display the gas concentration.
Press
[
ESC
] to return to the measure page.
6.6.2
Internal Natural Gas Leak Sensor
This operative mode needs the internal gas sensor installed. It allows natural gas monitoring for gas network leak test.
Remove any pneumatic connection from the the instrument gas INLET.
To perform the test, press the [
MENU
] key from the measuring page.
Press the [
ENTER
]. Press the [
MENU
] key until the following page will be displayed:
Содержание EcoLine 2000
Страница 53: ...Instruction Manual MM850404 ed 05 53 APPENDIX...
