Eurotron EcoLine 2000, Инструкция по эксплуатации

Страница: 38 / 59

Instruction Manual MM850404 ed.05
38
ƒ
Pressing the [ W ] and [ X ] keys you can change page to display other parameters.
ƒ Press the [ PRINT ] key to print the data.
ƒ Press [ STORE ] to go to the previous page.
ƒ Press [ ESC ] to return to the measure page.
7.4 Recall Average Data
ƒ Press the [ STORE ] key to enter in memory management menu.
ƒ Select the desired Tag [ S ] and [ T ] until it is displayed.
ƒ Press the [ MENU ] key to display the “ SINGLE ” or “ AVERAGE ” message.
ƒ Press the [ S ] until the “ AVERAGE ” message is displayed.
ƒ Press the [ MENU ] key to display the “ RECALL ” message.
First memory data
Last memory data
ƒ
Press the [ ENTER ] key to display the data.
ƒ Press the [ PRINT ] key to print the data.
ƒ Press [ STORE ] to go to the previous page.
ƒ Press [ ESC ] to return to the measure page.
7.5 RS232 Serial Interface Set-Up
The 2000 series is enabled for RS232 bi-directional serial communication. An optional adapter cable (cat. BBxxxxxx) can
be included for PC connection.
Before starting the data transfer, you need to check and eventually change the baudrate to be sure that the PC and the
instrument have the same communication speed.
Adopt the following procedure:
•
turn the instrument on pressing simultaneously [ PRINT ] + [ ON/OFF ] keys.
•
Press the [ ENTER ] key until “ BAUDRATE ” parameter is displayed.
•
If needed, change the “ BAUDRATE ” (standard = 9600 baud) pressing the [ S ] and [ T ] keys. Available speed are:
9600, 19200, and 38400 baud.
•
Press the [ ENTER ] key to store the changes.
•
Turn the instrument off.
7.6 DBGas 2004 Software
DBGas 2004 is a PC Windows 95/98/NT compatible program to manage all checks and measures activities on boilers
and to transfer data to and from E Instruments Group Gas analyzers. The software is designed for a complete and
efficient managing and recording of the analysis data of your clients.
DBGas 2004 allows you to have a no limits
database on your PC with all customer and boiler information, to select up to 40 boilers to be checked, to assign an
operator name and transfer the data to the analyzer. The operator can memory store up to 250 boiler checks and print
the report; after the analysis he can transfer the data to the PC. The software will assign the analysis to the correct boiler
in the database. Operator can view and print the data until he deletes these.
The main menu is made of 4 buttons: Plants/Clients, Analysis, Fuels and Exit from program.