Instruction Manual MM850404 ed.05
43
Press the [
S
] and [
T
] keys to change the flashing digit. Press the [
W
] and [
X
] keys to select a different digit.
Press the [
ENTER
] key to store the changes and modify the CO alarm level.
Press the [
S
] and [
T
] keys to change the flashing digit. Press the [
W
] and [
X
] keys to select a different digit.
Press the [
ENTER
] key to store the changes and modify the Tair alarm level.
Press the [
S
] and [
T
] keys to change the flashing digit. Press the [
W
] and [
X
] keys to select a different digit.
Press the [
ENTER
] key to store the changes.
Press
[
ESC
] to return to the measure page.
When one of the alarm levels is more than the reading, a continuous beep is generated by the analyser. Press the
[
ENTER
] key to mute the instrument.
8.3
Measure related to Oxygen percentage
Directly form the instrument keyboard, it is possible to set the Reference Oxygen percentage for CO measurements. The
normative related with your application will give you the correct value to input. The analysis printed report carriers both
measured and calculated CO values.
Pressing the [
REF. O
2
] key the CO measured parameter will be displayed as referred to the programmed oxygen value.
When selected this mode, the message “
REF O2CO
” will be displayed.
Adopt the following procedure:
Содержание EcoLine 2000
Страница 53: ...Instruction Manual MM850404 ed 05 53 APPENDIX...
