Appendices
VoIP²ALL 8 - 16 - 24 Channel Gateway User Guide
www.eurotech-communication.com
70
9)
Click
OK
.
10)
In the Hyper Terminal, click
Connect.
When restarting the Gateway you will see the initialization process. Wait until it is finished.
11)
Click
Enter
. On screen you will see
#
.
12)
To see the IP settings, write the command
ifconfig
and click
Enter
.
The following window appears (The IP Address of the Gateway is marked in a red circle.):
6.2.
APPENDIX B: SENDING USSD (UNSTRUCTURED SUPPLEMENTARY SERVICE
DATA) COMMANDS IN THE DEBUG SCREEN
The VoIP²ALL allows you to send and receive USSD commands from the Debug screen.
This option is used to check and recharge balances with USSD commands.
To send USSD commands from the Debug screen:
1)
On the Main Toolbar, click
Debug
.
2)
In the lower left corner of the screen, click the
Enable Debug
.
