Advanced Configuration
VoIP²ALL 8 - 16 - 24 Channel Gateway User Guide
www.eurotech-communication.com
24
Secondary Bill Interval
Secondary Cost per Bill Int
Current Balance
5)
Click
Save.
To define the Call Duration SIM list:
1)
On the Main Toolbar, click
Ports
.
2)
From the ports list on the left, select a port.
3)
Select the
Time Table
tab.
4)
In
Type
, select a Time Table type.
5)
In
Swapping Type
, select
Call duration
.
6)
In
Available SIMs
, select the Local SIM
(L1)
.
7)
In the Time Table, click a cell. A dialog box appears.
8)
In the dialog box, enter the amount of units you want to limit the SIM to that day.
9)
To unselect the cell, click it again.
10)
Click
Save
.
4.2.
CONFIGURING THE INTERNAL SIP SERVER
The Gateway has an internal SIP Server that is able to register up to 32 SIP clients. A SIP client can be
a:
VoIP phone
External SIP Server
IP PBX/Softswitch
The internal SIP Server can work with or without authentication. When working with authentication,
the SIP account must be entered into the
Users
list.
To configure the SIP Server:
1)
On the Main Toolbar, click
VoIP.
2)
Select the
SIP
tab.
3)
In the Internal SIP Settings section of the window, define the following parameters:
SIP Port
- The TCP port of the SIP Server. The default is 5060.
RTP Start Port
- The first port in the RTP port range. The default is 5066.
RFC2833 Payload Type
- The type of payload to be used by the SIP. The default is 101.
Codec 1 - Codec 4
-
The priority of the Codec which the SIP Server uses when making outgoing VoIP calls.
Note: The CODEC priority is relevant only in calls to SIP, the codec for the incoming calls from SIP is
determined by the SIP that sends the calls to the Gateway.
Authentication
- When enabled a user name and password is required to register the
VoIP²ALL in the internal SIP Server.
Realm
- The name of the SIP Server realm of operation.
