EuroTech Communication VOIP ALL SERIES Скачать руководство пользователя

Страница: 6 / 77

Introduction to the VoIP²ALL Gateway

VoIP²ALL 8 - 16 - 24 Channel Gateway User Guide
www.eurotech-communication.com



SIM Server

- A VoIP²ALL series unit with a SIM Server program containing SIM cards and no

cellular cards.



Internal SIM Server

- A SIM Server program that runs on a Gateway, allowing access to SIM cards

in the Gateway.



External SIM Server

- A SIM Server program that runs on an external SIM Server, or another

Gateway, allowing access to SIM cards in the external SIM Server.



Master card

- A card that controls the operation of the VoIP²ALL, containing a DSP processor with

a Linux based operating system.



Port (ch)

- A port is single channel that can send call(s).



Cellular Card (Slave card)

- A card with cellular ports (modules).



SIM Server Card

- A SIM Server card that has 32 SIM sockets, which is located in a SIM Server or

Gateway.



VoIP

- A protocol for transmitting voice calls on Ethernet networks.



SIP

- A protocol for registering VoIP clients and making VoIP calls.



SIP Server

- A virtual PBX that can register and connect SIP phones.



SIP Account

- A user name and password which is given to register a SIP phone.



SIP Registration

- The process of the initial connection of the SIP account to the SIP Server.



Authorization

- SIP registration with username and password



SIP Client

- A SIP phone that is registered in a SIP Server.



Internal SIP Server

- The SIP Server that is built into the Gateway.



SIM Registration

- The activation of the SIM in a cellular network. The SIM must be registered to

make calls.



Local SIM

- A SIM on a cellular card.



Virtual SIM

- A SIM from a SIM Server.

Содержание VOIP ALL SERIES














































































Результаты поиска

Содержание VOIP ALL SERIES

Отзывы:

Похожие инструкции для VOIP ALL SERIES

Бренды по названию

Популярные бренды

EuroTech Communication VOIP ALL SERIES, Руководство пользователя

Результаты поиска

Содержание VOIP ALL SERIES

Отзывы:

Похожие инструкции для VOIP ALL SERIES

Бренды по названию

Популярные бренды