EUROCOM Notebook, Руководство пользователя

Страница: 36 / 158

1 - 16 System Map: Left View
Quick Start Guide
1
System Map: Left View
3
2
Left View - Model A
Left View - Model B
1
2
3
CD/DVD Emergency Eject
If you need to manually eject a CD/DVD (e.g. due to
an unexpected power interruption) you may push
the end of a straightened paper clip into the emer-
gency eject hole. Do not use a sharpened pencil or
similar object that may break and become lodged in
the hole.
Media Warning
Don’t try to remove a floppy disk/CD/DVD while the
system is accessing it. This may cause the system
to “crash”.
Changing DVD Regional Codes
Go to the Control Panel and double-click System > Hardware
(tab), click Device Manager , then click the + next to DVD/CD-
ROM drives . Double-click on the DVD-ROM device to bring up
the Properties dialogue box, and select the DVD Region (tab)
to bring up the control panel to allow you to adjust the regional
code (see
“DVD Regional Codes” on page 2 - 5 ).
DVD region detection is device dependent, not OS-dependent.
You can select your module’s region code
5 times. The fifth se-
lection is permanent. This cannot be altered even if you change
your operating system or you use the module in another com-
puter.
Figure 1 - 8 - Left View
1. Security Lock Slot
2. Speaker
3. Optional Device Drive Bay
(for CD/DVD Device - see page
2 - 3 , or 2nd PATA Hard Disk, or
2nd Battery)