EURANEG SD4005, Оригинальная инструкция по эксплуатации

Страница: 23 / 34

Page 22
Installation, first use and operation
5.4 Operation
•
Hold one hand (or both hands) within the sens or’s
range (the sensitive area has been factory set to the
middle of the inspection window), and the dispenser
will deliver
•
Take your hand away and then hold it again in the
sensor
’ s range and the dispenser will deliver again
•
After 2-3 dispenses (level 1), the pump will be fully
loaded and the dispenser will be ready for use
Setting higher doses (levels 2 – 4): see chapter 6.
While you keep your hand within the sens or‘s range,
the system will dispense only once; to make the
dispenser deliver more than once, take your hand
away and then move it back into the sens
or’s range.
For higher volumes, it is recommendable to set a
higher dose level
LED indicator:
•
blue = dispenser is ready for operation
•
red = indicates a fault e.g. need to change the
batteries
•
blue-and-red = electronic fault – do a “ rese t” (see
chapter 12.). In case this does not solve the problem,
please contact our local dealer or visit our webpage
www.euraneg.com for technical support