8
Warning: Never connect more than one charger to the portable charger.
6. OPERATING INSTRUCTIONS
6.1 OVERVIEW
1. Display
2. Inductive charging zone
3. Switch
4. USB output 2
5. USB output 1
6. USB-Micro-C input
7. USB-Micro-C input
8. Lightning input
9. Charging cable (USB-A / USB-Micro-B)
10. Charging status in percent
11. Charger connected
12. Device connected to the USB outputs
13. Cable connection established successfully
14. Device connected to the inductive charger
Figure 1: Overview
Figure 2: Overview of the display
6.3 CHARGING A MOBILE DEVICE WITH THE INDUCTIVE CHARGER
Consult the manual of your mobile device to find out how to position the device on an inductive
charger. Switch on the portable charger with inductive charger by pressing the button once (Position 3
in the Overview). Place your mobile device appropriately on the inductive charging zone (Position 2 in
the Overview) of the inductive charger. The symbol indicating that an inductive charger is connected
(Position 14 in the Overview) is activated. Remove the mobile device from the inductive charger when
the battery of your mobile device has been charged. Press the button twice to switch off the portable
charger with inductive charger.
If the battery is fully charged, the charging status shows 100 % and the symbol indicating a charger is
connected will be permanently lit.
After charging, disconnect the portable charger with inductive charger from the charger. Press the
button (Position 3 in the Overview) twice to switch off the portable charger with inductive charger.
To charge the portable charger, use the charging cable (Position 9 in the Overview) to connect a USB
charger (5 V DC, 1.5 – 2.1 A) to the USB-Micro-B input (Position 7 in the Overview). It is also possible,
with the appropriate cables, to connect a charger to the USB-Micro-C input (Position 6 in the Overview)
or the Lightning input (Position 8 in the Overview). Plug the USB charger into a mains socket. The display
is activated, the charging status (Position 10 in the Overview) is shown. The symbol indicating a charger
is connected (Position 11 in the Overview) flashes during the charging process.
6.2 CHARGING THE BATTERY
