7
Do not dispose of electrical devices with the household waste! Electrical and electronic de-
vices must be collected separately and sent for environmentally friendly recycling. Please
contact your community or city council regarding disposal options for electrical and elec-
tronic scrap.
7. MAINTENANCE AND CARE
8. NOTES REGARDING ENVIRONMENTAL PROTECTION
9. CONTACT INFORMATION
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal
Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
[email protected]
www.eal-vertrieb.com
Figure 1:
Charging port
Separate the inductive charger from the on-board network of your vehicle when the vehicle
is switched off, otherwise the battery may be drained.
To charge, place your smartphone on the inductive charger. The charging process is started automatically.
Place the inductive charger on the dashboard or centre
console of your vehicle. Choose as even a surface as possible. Pay
attention to the safety precautions detailed in section 4. Plug the
micro-USB-B connector of the charging cable into the charging socket
of the inductive charger, Figure 1.
Connect the USB connector of the charging cable to a USB port of your
vehicle or with a USB vehicle charger. The inductive charger is now ready for use.
CHARGING
INDUCTIVE CHARGER
The set is maintenance-free if used according to its intended purpose.
After a longer period of use, dirt and dust will collect between the mobile device and the
protective cover. This may result in abrasions and scratches on the device. For this reason,
regularly clean the rear of the device and the inside of the protective cover.
Clean the inductive charger with a soft, dry cloth only. Do not use cleaning agents.