EUCHNER MGBS-P-L AP Series, Руководство по эксплуатации, Страница: 5 / 40

5
2527245-02-01/22 (translation of the original operating instructions)
Operating Instructions
Safety System MGBS-P-L.-AP…
EN
2. Correct use
The safety system MGBS consists at minimum of one locking module MGBS-P-L.-… and one handle module MGBS-H… and
is an interlocking device with guard locking (type 4). Devices with unicode evaluation possess a high coding level, devices
with multicode evaluation possess a low coding level.
In combination with a movable guard and the machine control, this safety component prevents the guard from being opened
while a dangerous machine function is being performed.
This means:
Ì Starting commands that cause a dangerous machine function must become active only when the guard is closed and locked.
Ì The guard locking must not be released until the dangerous machine function has ended.
Ì Closing and locking a guard must not cause automatic starting of a dangerous machine function. A separate start command
must be issued. For exceptions, refer to EN ISO 12100 or relevant C-standards.
Devices from this series are also suitable for process protection.
Before the device is used, a risk assessment must be performed on the machine, e.g. in accordance with the following
standards:
Ì EN ISO 13849-1
Ì EN ISO 12100
Ì IEC 62061
Correct use includes observing the relevant requirements for installation and operation, particularly based on the following
standards:
Ì EN ISO 13849-1
Ì EN ISO 14119
Ì EN 60204-1
The safety system MGBS is only allowed to be operated in conjunction with the intended EUCHNER handle modules and the
related connection components and accessories from EUCHNER.
On the modification of system components, EUCHNER provides no warranty for function.
Important!
Ì The user is responsible for the proper integration of the device into a safe overall system. For this
purpose, the overall system must be validated, e.g. in accordance with EN ISO 13849-2.
Ì Correct use requires observing the permissible operating parameters (see chapter 14. Technical
data on page 30 ).
Ì If a data sheet is included with the product, the information on the data sheet applies.
Ì It is only allowed to use components that are permissible in accordance with the table below.