EUCHNER 099265 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 38

EUCHNER 099265 Скачать руководство пользователя страница 8

Manual EKS Ethernet TCP/IP

Page 8/38

Subject to technical modifications

2547185-01-10/22

2 Safety precautions

Warning!

The EKS read/write station is not a safety component in the sense of the Machinery Directive.

Without additional precautions the read/write station must not be used to provide a safety function,

particularly if failure or malfunction of the device could endanger the safety or health of people in the

operating area of a machine. On this topic, pay particular attention to the sections

(see

chapter 1.4) and

Electrical connection

(see chapter 6).

Warning!

Mounting and electrical connection are allowed to be performed only by authorized personnel who are

familiar with the applicable regulations on accident prevention and have read and understood this

manual.
Furthermore, mounting and electrical connection of the version EKS

FSA

must be performed only by

personnel familiar with handling safety components.

Caution!

Modifications to the electronics of the read/write station and any other changes, especially mechanical

modifications and reworking, are not permissible and will result in the loss of the warranty.

«
...
6
7
8
9
10
...
»

Содержание 099265







































Отзывы:

Нет отзывов